The structure is composed by a belt bench in heavy carpentry where the stripes lay on, and it has an automatic and adjustable, through inverter, movement.
The belt, where the stripes are laid on, scrolls over a no-wear and interchangeable plate.
The machine has calibration’s bridges that allow the up/down movement of diamond splindles, with the possibility to regulate the quote on its console.
The moving bridge has polishing spindle for the transversal heads’ movements, by means of the pinion-rack transmission in oil bath, with the regulation of the movement through inverter.
The polishing spindles’ up/down movement is due to pneumatic cylinders.
|Max. width workable||650 mm|
|Max thickness workable||10/ 80 mm|
|Number of calibration units||01|
|Number of smoothing and polishing units||06|
|Ascent and descent diamonds with quote’s display automatic or manual|
|Polishing heads’ bridge with transversal movements in oil bath|
|Diameter diamond milling machine||750 mm|
|Diameter plate carrying abrasive||420 mm|
|Power of each calibration group||18,5 kw|
|Power of each smoothing and polishing group||7,5 kw|
|Power of the up/down calibrator’s motor||0,75 kw|
|Power of the bridge moving motor||0,75 kw|
|Belt’s speed||0 – 4000 mm/min|
|Machine’s length||6200 mm|
|Machine’s width||1920 mm|
|Machine’s High||2220 mm|
|Machine’s overall weight||8150 kg|
|Water consumption recommended for cooling||140 lt/min|
|Max pressure of pneumatic system||8 bar|
|Mains frequency||50 Hz|
|Mains voltage||400 V|
|Phases of electricity supply||3|