Drawbridge trimming machines 1000
Machine for the longitudinal stripes cut, in thinner slats.
The machine can accomplish this work on granite and marble.
The cut is parallel to the direction of the stripes scrolling.
Menu
The structure is composed by a belt bench in heavy carpentry, where the stripes lay on. The belt has an automatic movement adjustable with inverter.
The belt, where the stripes are laid on, scrolls over a no-wear and interchangeable plate
The machine presents the possibility to regulate manually the cut’s depth, thanks to a threaded bar’s register that allows the lifting and the lowering of the bridge supporting the disk-carrying spindle group.
The disk-carrying spindle’s group is activated through belt transmission, by a 90 kw motor, located on the moving branch.
There’s also an entry pressing bar, that stabilizes the stripes before the cut.
| Max width workable | 1000 mm |
| Max thickness workable | 80 mm |
| Number of cutting disks | 01-20 |
| Cutting disk’s diameter | From 350 mm to 400 mm |
| Machine’s overall width | 1700 |
| Machine’s overall length | 4500 mm |
| Machine’s overall high | 2200 mm |
| Belt’s speed | 0 – 4000 mm/min |
| Power of the disk-spindle’s motor | 70/ 90 kw |
| Overall power installed | 100kw |
| Machine’s overall weight | 4200 kg |
| Water consumption recommended for cooling | 80 lt/min |
| Mains frequency | 50 Hz |
| Mains voltage | 400 V |
| Phases of electricity supply | 3 |
Mappa del sito
by Businesstep.it